+
GND
SCL
RAW
VCC
SDA
A3
A2
A1
RDIO
JRDIO
BRD
JPOWER
JIRQ
SIG
ProMini shield
for MySens rs
BY NCA78 - CERN OHL V1.2
V0.9 - 18/05/2017
D3
D2
if using CR2032
> 100uF
CR2032
GND
RAW
CR123
RAW
GND
RAW
C4
C5
C8
C9
C7
C6
GND
RAW
VCC
CR2032
REGUL
REGUL
C12
C3
C3
+
GND
SCL
RAW
VCC
SDA
A3
A2
A1
RDIO
JRDIO
BRD
JPOWER
JIRQ
SIG
ProMini shield
for MySens rs
BY NCA78 - CERN OHL V1.2
V0.9 - 18/05/2017
D3
D2
if using CR2032
> 100uF
CR2032
GND
RAW
CR123
RAW
GND
RAW
C4
C5
C8
C9
C7
C6
GND
RAW
VCC
CR2032
REGUL
REGUL
C12
C3
C3
+
GND
SCL
RAW
VCC
SDA
A3
A2
A1
RDIO
JRDIO
BRD
JPOWER
JIRQ
SIG
ProMini shield
for MySens rs
BY NCA78 - CERN OHL V1.2
V0.9 - 18/05/2017
D3
D2
C4
C5
C8
C9
C7
C6
+
GND
SCL
RAW
VCC
SDA
A3
A2
A1
RDIO
JRDIO
BRD
JPOWER
JIRQ
SIG
ProMini shield
for MySens rs
BY NCA78 - CERN OHL V1.2
V0.9 - 18/05/2017
D3
D2
C4
C5
C8
C9
C7
C6
>NAME
>VALUE
Small solder jumper with no paste layer so it will open after reflow.
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>0805 Large pad size</b><p>
Digikey recommended sizing
>NAME
>VALUE
<b>SOT-223</b>
>NAME
>VALUE
>NAME
>VALUE
M2 Screw, Pan Head, Loose mount,
2.3 mm hole,
4 mm head,
4.8 mm keep out
M2
<b>Linear Devices</b><p>
Operational amplifiers, comparators, voltage regulators, ADCs, DACs, etc.<p>
<author>Created by librarian@cadsoft.de</author>
<b>SMALL OUTLINE TRANSISTOR</b><p>
reflow soldering
>NAME
>VALUE
>NAME
>VALUE
STANDARD NRF
WARNING !
PA/LNA ONLY
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
+
-
AAA
AAA
+
-
CR123
CR123
>NAME
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>Name
>Value
>Value
>Name
>NAME
>VALUE
>Name
>Value
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
+
-
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>EAGLE Design Rules</b>
<p>
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
<b>Seeed Studio EAGLE Design Rules</b>
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.