<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.6.0">
<drawing>
<board>
<plain>
<wire x1="30.607" y1="0" x2="30.607" y2="15.292" width="0" layer="20"/>
<wire x1="30.607" y1="15.292" x2="25.507" y2="15.302" width="0" layer="20"/>
<wire x1="25.507" y1="15.302" x2="25.497" y2="15.312" width="0" layer="20"/>
<wire x1="25.497" y1="15.312" x2="25.497" y2="17.832" width="0" layer="20"/>
<wire x1="25.497" y1="17.832" x2="25.507" y2="20.382" width="0" layer="20"/>
<wire x1="25.507" y1="20.382" x2="0" y2="20.382" width="0" layer="20"/>
<wire x1="0" y1="20.382" x2="0" y2="0" width="0" layer="20"/>
<text>+</text>
<text>GND</text>
<text>SCL</text>
<text>RAW</text>
<text>VCC</text>
<text>SDA</text>
<text>A3</text>
<text>A2</text>
<text>A1</text>
<text>RDIO</text>
<text>JRDIO</text>
<text>BRD</text>
<text>JPOWER</text>
<text>JIRQ</text>
<text>SIG</text>
<text>ProMini shield</text>
<text>for MySens  rs</text>
<text>BY NCA78 - CERN OHL V1.2</text>
<text>V0.9 - 18/05/2017</text>
<text>D3</text>
<text>D2</text>
<text>C4</text>
<text>C5</text>
<text>C8</text>
<text>C9</text>
<text>C7</text>
<text>C6</text>
<wire x1="0" y1="0" x2="30.607" y2="0" width="0" layer="20"/>
</plain>
<libraries>
<library name="TD-MySensors">
<packages>
<package name="SOT23-3">
</package>
<package name="PAD-JUMPER-2-NO_YES_SILK">
<description>Small solder jumper with no paste layer so it will open after reflow.</description>
</package>
<package name="DUPONT_10">
</package>
<package name="PRO_MINI_CLONE_NO_PROG">
</package>
<package name="R_0805">
<description>&lt;b&gt;0805 Large pad size&lt;/b&gt;&lt;p&gt;

Digikey recommended sizing</description>
</package>
<package name="SOT223">
<description>&lt;b&gt;SOT-223&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="linear">
<description>&lt;b&gt;Linear Devices&lt;/b&gt;&lt;p&gt;
Operational amplifiers,  comparators, voltage regulators, ADCs, DACs, etc.&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="SOT23">
<description>&lt;b&gt;SMALL OUTLINE TRANSISTOR&lt;/b&gt;&lt;p&gt;
reflow soldering</description>
</package>
</packages>
</library>
<library name="nrf24l01plus">
<packages>
<package name="WIRELESS-NRF24L01-SMDWARNING">
</package>
<package name="WIRELESS-NRF24L01-PA-SMD2">
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="EIA3216">
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="OSHW-LOGO-MINI">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CPOL-RADIAL-10UF-25V">
</package>
<package name="0805">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="ATSHA3" library="TD-MySensors" package="SOT23-3" value=""/>
<element name="IC4" library="linear" package="SOT23" value="MCP1703CB"/>
<element name="JIRQ3" library="TD-MySensors" package="PAD-JUMPER-2-NO_YES_SILK" value=""/>
<element name="JPOWER3" library="TD-MySensors" package="PAD-JUMPER-2-NO_YES_SILK" value=""/>
<element name="JRDIO3" library="TD-MySensors" package="PAD-JUMPER-2-NO_YES_SILK" value=""/>
<element name="EXT3" library="TD-MySensors" package="DUPONT_10" value="CONNECTOR_10DUPONT"/>
<element name="PROMINI3" library="TD-MySensors" package="PRO_MINI_CLONE_NO_PROG" value=""/>
<element name="M7" library="nrf24l01plus" package="WIRELESS-NRF24L01-SMDWARNING" value="WIRELESS-NRF24L01SMDWARNING"/>
<element name="C33" library="SparkFun-Capacitors" package="EIA3216" value="10uF">
<attribute name="PROD_ID" value="CAP-00811"/>
</element>
<element name="R4" library="TD-MySensors" package="R_0805" value="10K"/>
<element name="U4" library="TD-MySensors" package="SOT223" value=""/>
<element name="U$10" library="SparkFun-Aesthetics" package="OSHW-LOGO-MINI" value=""/>
<element name="C34" library="SparkFun-Passives" package="CPOL-RADIAL-10UF-25V" value=""/>
<element name="C35" library="SparkFun-Passives" package="0805" value="1uF"/>
<element name="C36" library="SparkFun-Passives" package="0805" value="1uF"/>
<element name="C37" library="SparkFun-Passives" package="0805" value="10uF"/>
<element name="C38" library="SparkFun-Passives" package="0805" value="100nF"/>
<element name="C39" library="SparkFun-Passives" package="0805" value="100nF"/>
<element name="C40" library="SparkFun-Passives" package="0805" value="10uF"/>
<element name="M8" library="nrf24l01plus" package="WIRELESS-NRF24L01-PA-SMD2" value="WIRELESS-NRF24L01-PA-EXTSMD2"/>
</elements>
<signals>
<signal name="GND3">
<contactref element="IC4" pad="1"/>
<contactref element="PROMINI3" pad="P$21"/>
<contactref element="ATSHA3" pad="3"/>
<contactref element="PROMINI3" pad="P$2"/>
<contactref element="PROMINI3" pad="P$27"/>
<contactref element="M7" pad="7"/>
<contactref element="C33" pad="C"/>
<contactref element="U4" pad="1"/>
<contactref element="EXT3" pad="9"/>
<contactref element="C34" pad="2"/>
<contactref element="C36" pad="2"/>
<contactref element="C35" pad="2"/>
<contactref element="C38" pad="2"/>
<contactref element="C37" pad="2"/>
<contactref element="C39" pad="2"/>
<contactref element="C40" pad="2"/>
<contactref element="M8" pad="1"/>
</signal>
<signal name="RAW3">
<contactref element="PROMINI3" pad="P$22"/>
<contactref element="JPOWER3" pad="1"/>
<contactref element="U4" pad="3"/>
<contactref element="EXT3" pad="10"/>
<contactref element="C38" pad="1"/>
<contactref element="C37" pad="1"/>
</signal>
<signal name="VCC3">
<contactref element="PROMINI3" pad="P$19"/>
<contactref element="JPOWER3" pad="2"/>
<contactref element="IC4" pad="3"/>
<contactref element="JRDIO3" pad="1"/>
<contactref element="ATSHA3" pad="2"/>
<contactref element="R4" pad="1"/>
<contactref element="U4" pad="2" route="any" routetag="G$1.VOUT@1"/>
<contactref element="U4" pad="4" route="any" routetag="G$1.VOUT@1"/>
<contactref element="EXT3" pad="8"/>
<contactref element="C36" pad="1"/>
<contactref element="C40" pad="1"/>
<contactref element="C39" pad="1"/>
</signal>
<signal name="VCC_RADIO3">
<contactref element="IC4" pad="2"/>
<contactref element="JRDIO3" pad="2"/>
<contactref element="M7" pad="8"/>
<contactref element="C33" pad="A"/>
<contactref element="C34" pad="1"/>
<contactref element="C35" pad="1"/>
<contactref element="M8" pad="8"/>
</signal>
<signal name="CSN3">
<contactref element="PROMINI3" pad="P$11"/>
<contactref element="M7" pad="5"/>
<contactref element="M8" pad="6"/>
</signal>
<signal name="MOSI3">
<contactref element="PROMINI3" pad="P$12"/>
<contactref element="M7" pad="3"/>
<contactref element="M8" pad="4"/>
</signal>
<signal name="CE3">
<contactref element="PROMINI3" pad="P$10"/>
<contactref element="M7" pad="6"/>
<contactref element="M8" pad="7"/>
</signal>
<signal name="SCK3">
<contactref element="PROMINI3" pad="P$14"/>
<contactref element="M7" pad="4"/>
<contactref element="M8" pad="5"/>
</signal>
<signal name="MISO3">
<contactref element="PROMINI3" pad="P$13"/>
<contactref element="M7" pad="2"/>
<contactref element="M8" pad="3"/>
</signal>
<signal name="SDA_ATSHA3">
<contactref element="PROMINI3" pad="P$18"/>
<contactref element="ATSHA3" pad="1"/>
<contactref element="R4" pad="2"/>
<contactref element="EXT3" pad="3"/>
</signal>
<signal name="A9">
<contactref element="PROMINI3" pad="P$15"/>
</signal>
<signal name="A10">
<contactref element="PROMINI3" pad="P$16"/>
<contactref element="EXT3" pad="1"/>
</signal>
<signal name="A11">
<contactref element="PROMINI3" pad="P$17"/>
<contactref element="EXT3" pad="2"/>
</signal>
<signal name="D22">
<contactref element="PROMINI3" pad="P$9"/>
</signal>
<signal name="D23">
<contactref element="PROMINI3" pad="P$8"/>
</signal>
<signal name="D24">
<contactref element="PROMINI3" pad="P$7"/>
</signal>
<signal name="D25">
<contactref element="PROMINI3" pad="P$6"/>
</signal>
<signal name="D26">
<contactref element="PROMINI3" pad="P$5"/>
</signal>
<signal name="D27">
<contactref element="PROMINI3" pad="P$4"/>
<contactref element="EXT3" pad="4"/>
</signal>
<signal name="D28">
<contactref element="PROMINI3" pad="P$3"/>
<contactref element="JIRQ3" pad="2"/>
<contactref element="EXT3" pad="5"/>
</signal>
<signal name="A4_SDA3">
<contactref element="PROMINI3" pad="P$23"/>
<contactref element="EXT3" pad="6"/>
</signal>
<signal name="A5_SCL3">
<contactref element="PROMINI3" pad="P$24"/>
<contactref element="EXT3" pad="7"/>
</signal>
<signal name="IRQNRF3">
<contactref element="M7" pad="1"/>
<contactref element="JIRQ3" pad="1"/>
<contactref element="M8" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
