>NAME>VALUE<B>Small Outline Narrow Plastic Gull Wing</B><p>
150-mil body, package type SN>NAME>VALUE<b>0805 Large pad size</b><p>
Digikey recommended sizing>NAME>VALUE<b>0805 Large pad size</b><p>
Digikey recommended sizing>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Dual In Line Package</b>>VALUE>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEG5Q SPDT Relay (SparkFun SKU: COM-00100). Footprint should also work with SPST-NO relay.>Name>ValueCOMCOMININNCNOG3MB Relay>VALUE>NAMEININCOMNONC>Name>Value>Name>Value>NAME>VALUE>Name>Value<B>DIODE</B><p>
diameter 2 mm, horizontal, grid 10.16 mm>NAME>VALUE>NAME>VALUE>NAME>VALUEJST 2 Pin PH style connector. 6mm x 4.9mm>Name>Value>NAME>VALUE>NAME>VALUESmall solder jumper with no paste layer so it will open after reflow.>NAME>VALUE>NAME>VALUE>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEDSG>Name>Value>Name>Value>NAME>VALUE>NAME>VALUE>NAME>VALUE2 Pin connectorEL817 Opto CouplerBSS138 Logic Level converter 5V->3.3V<B>DIODE</B><p>
high speed (Philips)<H1>FNE Library - Diodes SMD</H1>
<p>Knihovna obsahuje diody pro povrchovou montáž</p>
<p>Library contain diodes form surface mounting technology</p><b>Diode</b>>NAME>VALUE<b>SOD323 Reflow soldering</b> Philips SC01_Mounting_1996.pdf>NAME>VALUE>NAME>VALUE<H1> General purpose diode</H1>
<H2>1N4148W</H2><br>
Datasheet: <a href="\diodes-datasheets\1N4148W.pdf">\diodes-datasheets\1N4148W.pdf</a><br><br>
<b>Features:</b><br>
• Fast switching device (TRR<4 nS)<br>
• General purpose diodes<br>
• Flat lead SOD-123 small outline plastic package<br>
• Surface device type mounting<br>
• Moisture sensitivity level 1<br>
• Clip bonding construction, good thermal capability<br>
• Pb free version<br>
• Matte tin (Sn) lead finish with nickel (Ni) underplate<br>
• Band indicates cathode<br><br>
<b>Electrical Characteristics</b><br>
Power Dissipation 400mW<br>
Repetitive Peak Reverse Voltage 75V<br>
Continuous Forward Current 150mA<br>Vavle Controller
L9110Valve BoardProtected
Input BoardSensor Board3.3V/5V Level Shifting
BSS138 MOSFETParking LED RingDistance sensor needs fast timing so can only be plugged into
the top card slot and use Arduino pins directly instead of
through shift registers.
Pin 1/2 (A4/A5) are left open on the main connector to allow
I2C pins to remain available for other sensors on the main board.Relay AC High PowerRelay DCI2C BoardControls 1 motorized valve with sensor wires that read GND when
that state (open/closed) is active. Optional status LED and sensor input.3 sensor inputs with pull up or down resistors. 3 LED outputs
using 3V3 and 1k resistors. 3v/5v option on the sensor inputs
because leak rope sensor requires 5v to function and works
with 3v analog only inputs. NOTE: rope leak sensor requires
analog input - won't work with digital. During build, must
solder jumper to select sensor power level and pull down/up.3 I2C inputs with pull up resistors. Other pins are pass
throughs. Only works on the top card slot, not through
shift registers.High power AC relay control with LED and switch with pull down resistor.
Relay is 5V NO/NC.5V DC relay. 2 output LED's, 3 inputs will pull down resistors
for switches or sensors.3 transistor outputs for simple DC relay style switching. 3 protected
inputs for reading ~12V signal lines. Primary use for reading external
PIR and camera signal wires and signalling cameras to record.
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.